2,417+ 5-Star Reviews
Taut Fabric. One Pass. Done.
🔥 Summer Sale — 50% OFF ends in00:00:00
Save 50% Aurifor Vacuum Steamer standing upright, taut fabric one pass
2,417+5-Star Reviews

Steam Alone Never Fixed a Wrinkle: Suction Pulls the Fabric Taut So It Can

Tension first. Then steam. It was never your steamer. A shirt on a hanger has nothing holding it taut, so the steam blows past the fibres instead of into them, and the crease springs back the second the steam clears — what we call the Slack-Fabric Rebound. Aurifor closes it. Two levels of suction pull the garment flat onto a heated ceramic plate first, so the steam has something to work against and one pass finishes the job. Try it for 90 days.

$79.99$159.98You save $79.99
  • Hold a shirt flat with one hand — two levels of suction grip the fabric against the plate so it stops swinging away from the steam
  • Finish five or six garments before you refill — a 400 ml tank that twists off the base and fills at the tap
  • Steam it on the hanger or press it flat — the heated ceramic plate does both, so collars and cuffs still get a real edge
  • Put it on straight away — the same suction draws the moisture back out, so nothing comes off damp or water-spotted
  • Silk on low, denim on high — two steam settings, picked on the LED pad in one tap
  • Put it down mid-thought — it cuts power on its own if the tank runs dry, the plate runs hot, or it sits idle
Ship by this week|Stock LOW

I got through four shirts and a linen dress before it asked for water again. My old steamer wanted a refill halfway through the first shirt. — Marisa T., Verified Buyer

🚚
Fast Shipping
🔒
Secure Checkout
↩️
90-Day Returns
As Seen On:
USA TODAYFORBESMEN'S HEALTHCBSNBCWIREDUSA TODAYFORBESMEN'S HEALTHCBSNBCWIRED
Watch the fabric grab

One Pass, On the Hanger, One Hand

A dress shirt still on its hanger. A blazer on the back of the door twenty minutes before you leave. Curtains you have no intention of taking down. Hold the suction and the fabric snaps flat against the plate — that is the Slack-Fabric Rebound closing, and it is the whole reason one pass is enough. Built around the way a presser actually works a garment: tension first, then steam.

Why one pass is enough

Four Things a Steam-Only Steamer Cannot Do

Every handheld steamer sprays much the same steam. What changes the result is what happens to the fabric a half-second before the steam lands on it.

Fabric Grab
01

Fabric Grab

Because two levels of suction pull the garment onto the plate before the steam arrives, the fabric stops swinging and the steam goes into the fibres instead of past them. That is the Slack-Fabric Rebound closed — low for silk and chiffon, high for denim and canvas.

“I could see the shirt pull flat against it. That is the bit my old one never did.” — Devon R.

Whole-Pile Tank
02

Whole-Pile Tank

400 ml, and it twists off the base so you fill it under the tap instead of aiming at a hole. Five to six garments on one fill means you finish the stack in one go rather than walking back to the sink between shirts.

“Two work shirts, a dress and my husband's jeans on one fill. I stopped counting after that.” — Priya N.

Hang or Press
03

Hang or Press

The heated ceramic plate works both ways. Vertical on the hanger for the body of a shirt, flat on a table when a collar or a cuff needs a proper edge. The plate glides on cotton and does not catch on a knit, so one tool covers what used to take two.

“Collars were the reason I still owned an iron. Not any more.” — Curtis A.

Triple Cut-Off
04

Triple Cut-Off

It watches three things and stops on any of them: the tank running dry, the plate running hot, and the unit sitting idle on the counter. You can put it down halfway through a thought and walk out of the room.

“I left it on the dresser and forgot about it. Came back and it had already shut itself off.” — Hannah L.

Why Steam-Only Handheld Steamers Are a Thing of the Past

Same steam. Completely different result — because only one of them does anything about the Slack-Fabric Rebound.

Aurifor Vacuum Steamer

Two suction levels pull the garment flat before the steam reaches it
400 ml tank — five to six garments before you refill
Steams on the hanger and dry-presses flat, on one ceramic plate
Two steam settings on the LED pad — silk on low, denim on high
Suction draws the moisture back out, so it goes on dry
VS

Steam-Only Handheld Steamers

Fabric swings away from the nozzle, so your spare hand has to hold it tight
Runs dry halfway through the first shirt and sends you back to the sink
Vertical only — collars and cuffs still mean the iron and the board
One setting for everything, so a silk blouse gets what denim gets
Leaves the shirt damp and spotted, and you wait before you can wear it
Order Now & Save 50%

One Tool, Every Morning You Are Running Late

Ten Minutes to Leave

The shirt you need has a crease down the front. Hang it on the door, two passes, wear it. The board stays in the cupboard.

Hotel Room, 7am

It packs flat and weighs about what a full water bottle weighs. Better than the front-desk iron and whatever it was last used on.

Before the Meeting

A blazer on the back of the door. The suction holds the lapel still so the steam gets into the fold instead of drifting around it.

Curtains, Still Hanging

Long drops you are not about to take down. Work top to bottom one-handed and leave the rail exactly where it is.

Silk and Cashmere

Low steam, low suction. Enough to relax the fibres and let them fall straight, gentle enough to leave the weave alone.

One for the Suitcase

Most people end up with two — one that lives in the closet and one that lives in the carry-on, already packed.

Ten Minutes to Leave

The shirt you need has a crease down the front. Hang it on the door, two passes, wear it. The board stays in the cupboard.

Hotel Room, 7am

It packs flat and weighs about what a full water bottle weighs. Better than the front-desk iron and whatever it was last used on.

Before the Meeting

A blazer on the back of the door. The suction holds the lapel still so the steam gets into the fold instead of drifting around it.

Curtains, Still Hanging

Long drops you are not about to take down. Work top to bottom one-handed and leave the rail exactly where it is.

Silk and Cashmere

Low steam, low suction. Enough to relax the fibres and let them fall straight, gentle enough to leave the weave alone.

One for the Suitcase

Most people end up with two — one that lives in the closet and one that lives in the carry-on, already packed.

Ceramic Plate. ABS Body. CE Certified.

The plate is ceramic rather than bare metal, so it glides on cotton and does not catch on a knit. The body is ABS and PP moulded around a 1200 W heater built for US household current, and every unit ships CE certified. Textile research puts cotton's creasing down to hydrogen bonds that break under load and do not re-form on their own — which is why moisture, not pressure, is what actually releases a wrinkle, and why holding the fabric taut beats pressing it harder.

The Numbers, Plainly

What's in the Box:

1x Aurifor Vacuum Steamer, 1x cleaning brush, 1x measuring cup, 1x storage bag, 1x user manual

Specs:

Power:1200 W, 110–120 Vbuilt for US and Canadian outlets — it is not dual voltage
Water tank:400 ml, detachablefive to six garments on one fill
Suction:2 levels — 2500 Pa and 3600 Pathe lower level for lighter fabrics, the higher for thicker garments
Steam:2 levelslow for silk and chiffon, high for cotton, linen and denim
Modes:Steam, suction and dry presseach one a single tap on the LED pad
Soleplate:Ceramicglides on cotton without catching on a knit
Heat-up:About 15 secondsquicker than finding the ironing board
Weight:1.17 kgabout what a full water bottle weighs
Size:160 × 105 × 260 mmstands upright on its own tank between passes
Cord:8.2 ftreaches a wardrobe rail from a wall socket
Body:ABS and PP
Safety:Dry-boil, overheat and idle cut-offit stops on its own, so you do not have to remember
Certification:CE certified
90DAYmoney-back
guarantee
Buy With Confidence — It's 100% Risk-Free!

Try it for 90 days. If you aren't completely satisfied, we'll refund every penny. No questions asked.

What People Say After the First Shirt

Grip on the Fabric4.9
Wrinkle Removal4.8
Tank Capacity4.9
Easy to Hold4.6
Worth the Money4.7
4.8
Based on reviews from
2,417+ customers
Marisa T.Verified
Posted Aug 21
Four shirts before it wanted water

I got through four shirts and a linen dress before it asked for water again. My old steamer wanted a refill halfway through the first shirt, which is why it ended up in a cupboard.

Devon R.Verified
Posted Aug 14
I was sure it wouldn't beat my iron

I bought it expecting to keep the iron for anything that mattered. Three weeks in and the board has not come out once. You can watch the shirt pull flat against the plate — that is the bit I was not expecting.

Priya N.Verified
Posted Aug 9
Safe on the silk blouse

Low setting on a silk blouse I would never put an iron near. It relaxed the creases and left the weave alone. I did a seam first to be sure and there was no mark at all.

Curtis A.Verified
Posted Aug 3
Dry enough to put straight on

The thing that sold me is that the shirt is not damp afterwards. I steamed it, put it on, walked out. No water spots on navy cotton, which is where my last one always let me down.

Hannah L.Verified
Posted Jul 27
Lives in my carry-on now

Took it to Denver in a roll-aboard. Two dresses and a jacket done in the hotel room before breakfast. It stands up on its own tank so I was not hunting for somewhere to rest it.

Grant M.Verified
Posted Jul 22
One hand, which is the whole point

My wrist is not what it used to be and I expected to be fighting it. You hold the trigger and the fabric comes to you instead of the other way round. I did six shirts on a Sunday without stopping.

Elena V.Verified
Posted Jul 15
Did the curtains without taking them down

Full-length linen curtains that had been folded in a box for two years. I worked down them on the rail, high setting, and by the second panel I had the hang of it. No ladder, no washing machine.

Tobias K.Verified
Posted Jul 8
Bought a second one for my son

First one is by the wardrobe, second went to my son who has just started a job with a dress code and owns no iron. Fifteen seconds to heat up means he actually uses it on a weekday.

Marisa T.Verified
Posted Aug 21
Four shirts before it wanted water

I got through four shirts and a linen dress before it asked for water again. My old steamer wanted a refill halfway through the first shirt, which is why it ended up in a cupboard.

Devon R.Verified
Posted Aug 14
I was sure it wouldn't beat my iron

I bought it expecting to keep the iron for anything that mattered. Three weeks in and the board has not come out once. You can watch the shirt pull flat against the plate — that is the bit I was not expecting.

Priya N.Verified
Posted Aug 9
Safe on the silk blouse

Low setting on a silk blouse I would never put an iron near. It relaxed the creases and left the weave alone. I did a seam first to be sure and there was no mark at all.

Curtis A.Verified
Posted Aug 3
Dry enough to put straight on

The thing that sold me is that the shirt is not damp afterwards. I steamed it, put it on, walked out. No water spots on navy cotton, which is where my last one always let me down.

Hannah L.Verified
Posted Jul 27
Lives in my carry-on now

Took it to Denver in a roll-aboard. Two dresses and a jacket done in the hotel room before breakfast. It stands up on its own tank so I was not hunting for somewhere to rest it.

Grant M.Verified
Posted Jul 22
One hand, which is the whole point

My wrist is not what it used to be and I expected to be fighting it. You hold the trigger and the fabric comes to you instead of the other way round. I did six shirts on a Sunday without stopping.

Elena V.Verified
Posted Jul 15
Did the curtains without taking them down

Full-length linen curtains that had been folded in a box for two years. I worked down them on the rail, high setting, and by the second panel I had the hang of it. No ladder, no washing machine.

Tobias K.Verified
Posted Jul 8
Bought a second one for my son

First one is by the wardrobe, second went to my son who has just started a job with a dress code and owns no iron. Fifteen seconds to heat up means he actually uses it on a weekday.

Questions? Answered.

For the body of a shirt, better — it does it on the hanger in one pass. For a collar or a cuff, lay it flat, switch to dry press, and the heated ceramic plate presses it like a small iron. That is the reason the dry mode is there.

Not on the low setting. Steam relaxes the fibres rather than pressing them flat, so keep it on low steam with low suction and work in short passes. Test a hidden seam first, the way you would with any steamer.

It should not. The suction that holds the fabric also draws the moisture back out as you pass, which is why garments come off dry instead of damp. Let the plate finish heating before the first pass — a cold steamer is what spits.

Five to six garments on a full 400 ml tank. The tank twists off the base so you fill it under the tap rather than aiming into a hole, and you can see the level through it.

Yes, in the US and Canada. It is built for 110–120 V household current and ships with a US plug. It is not dual voltage, so it needs a converter if you take it overseas.

Empty the tank after a session and wipe the plate cold. The cleaning brush in the box is for the intake screen — a quick sweep every few weeks keeps the suction where it should be.

Send it back within 90 days and we refund you, no restocking fee. Use it on a real pile of laundry first — that is the only way to know.

Hang It Up and Get Dressed

Join 2,417+ people who stopped setting up the board. Most end up keeping two — one by the wardrobe, one already packed in the carry-on. This sale ends soon and stock is running low.

Order Now & Save 50%
🔒 Secure checkout · 90-day money-back guarantee